Products

Products » SkyTerra » Product Details
  

MSAT G2 Portable Go Kit

Go-kits are mounted in a black Pelican case with no exterior connections. All components are contained within the case. Overall design is as small, light, and rugged and reasonably priced. The MSAT-G2 is installed into the case with no foam or similar material.

The transceiver is installed, so that the ports on the transceiver unit are extended to the faceplate for full access to all the ports DB-9 serial port, handset port, and Ethernet port.

Transceiver unit is installed in such a manner to be easily removed or replaced by the user.

Threaded antenna cable fittings should be covered with a leashed, threaded cap.

Features

External ports are labeled on the faceplate as described below or with appropriate
abbreviations:


  1. Handset: “Handset”

  2. Serial Port/USB: “GPS/Interop”

  3. Antenna: “Antenna”

  4. Ethernet: “Software Upgrades”

  5. Speaker: “External Speaker”

Specifications

MSAT G2 Portable Go Kit Product Data Sheet


  • The kit is equipped with a 110-120 VAC and 12 VDC charging capability.

  • The kit is equipped with surge protection and voltage regulation to maintain
    the G2 in an “on” status regardless of what is happening with the AC/DC power
    source.

  • The kit is equipped with a 7.5 amp hour gel cell battery and installed in
    such a manner to make it easy for an end user to change. Circuitry is designed
    such that if the battery fails, the portable kit will continue to power the
    MSAT G2 from either the AC or DC power source.

  • The kit is equipped with a rocker style on/off switch that illuminates the
    color green when in the “on” position. · The kit is equipped with a green
    color charging light when go-kit is attached to either a 110 or 12V power
    source and this light should illuminate whether the unit is powered on or
    not.

  • The kit is equipped with a flashing red light that blinks when voltage on
    the battery drops to or below 12Volts, specifically when AC or DC power has
    been interrupted and the unit is operating only on battery power with power
    dropping.

  • Fuses are mounted on the face plate for easily accessed by the user. Fuses
    are marked as to their individual purpose, and are standard such that they
    are readily/easily obtained by user on the aftermarket.

  • The kit is equipped with two cigarette lighters with leashed/hinged plugs
    or covers.

  • The kit includes an optional external speaker with volume control independent
    from that of the G2 handset that will not mute the audio on the handset itself.
    This external speaker has a mounting capability within the kit such that the
    lid may close with the speaker installed. Speaker must have a minimum of 15’
    of appropriate cable to separate it from the kit itself.

  • Warning stickers are prominently displayed cautioning the user that: Unit
    should only be powered on with antenna attached (i.e. do not turn the unit
    on without an attached antenna; and do not attach an antenna to a G2 that
    is already powered on.)

  • Unit will not power from an AC and DC power source at the same time.

  • The interior of the lid shall offer “office” features such as a white board,
    or a plastic envelope which contains paperwork that can be seen through the
    envelope. The lid could accommodate a place for yellow, self sticking memo
    notes or a fully contained clip board sitting next to a white board.

Pricing

$5,995.00

SkyTerra Accessories